Installing and Configuring Cisco SUBE/Gateways (ICCC)

 

Who should attend

  • Network Video Engineer
  • Voice / UC / Collaboration / Communications Engineer
  • Collaboration Tools Engineer
  • Collaboration Sales / Systems Engineer

Prerequisites

Understand network fundamentals

Course Objectives

Upon completing this course, the student will be able to meet these objectives:

  • Configuring Gateway Voice Ports
  • SIP Protocols
  • Configuring VoIP Call Legs
  • Implementing a Dial Plan
  • Configuring Cisco Unified Communication Manager 11.x
  • Deploying Cisco VCUBE
  • Implementing Cisco Unified Border Element
  • High Availability on ISR G2, ISR 4k, and ASR
  • Security on Cisco Unified Border Element
  • Monitoring and Troubleshooting on Cisco Unified Border Element

Detailed Course Outline

Module 0: Introduction

  • Module Introduction
    • Topic List
  • Lesson 1: Introductions
    • Topic List
    • Learner Skills and Knowledge
    • Couse Goals
    • WebEx Basics
    • General Administration
    • Introductions
  • Lesson 2: SIP Trunking
    • SIP Trunking Overcomes TDM Barriers
    • Why does an enterprise need an SBC?
    • Primary CUBE Differentiators (1)
  • Module Summary

Module 1: Introduction to Voice Gateways

  • Module Introduction
    • Topic List
  • Lesson 1: Gateways
    • PSTN Access Methods
    • TDM Gateway vs. Cisco UBE
  • Gateway Functionality (1)
  • VoIP Signaling Protocols (1)
  • Gateway Deployment Example
  • Cisco Unified Communications Deployment Models
    • Single-Site Deployment (1)
    • Multisite WAN with Centralized Call Processing (1)
    • Multisite WAN with Distributed Call Processing (1)
    • Gateway Hardware Platforms
      • Cisco 4000 Series ISR Portfolio
      • Gateway Hardware - Voice Gateways
      • Voice Gateway Overview
      • Voice Gateway Call Legs
    • Cisco Unified Border Element
    • Summary
  • Lesson 2: Gateway Call Routing Components
    • Inbound and Outbound Dial Peers
      • Most Prevalent Dial-Peer Types
      • POTS and VoIP Dial Peers
      • VoIP Dial Peers
      • VoIP Dial Peer Examples
    • IP and Call Routing Comparison
    • Call Routing
    • Call Legs (1)
  • Lesson 3: Dial Peer Matching
    • Use of String Matching
    • String-Matching Characters
    • Number-Matching Examples
    • Matching Inbound Dial Peers (1)
    • Matching Outbound Dial Peers (1)
    • Summary
  • Lesson 4: Introduction to Voice Gateways
    • Verifying Voice Ports (1)
    • Voice Codecs (1)
    • Voice Codec Packet Rates and Payload Sizes
    • Voice Quality Evaluation
    • Codec Quality
    • Evaluating Overhead (1)
    • Per-Call Bandwidth Using Common Codecs
  • Lesson 5: Digital Signal Processors
    • Digital Signal Processors (1)
    • DSP Modules
    • DSP Module Comparison
  • Lesson 6: Codec Complexity
    • Codec Complexity (1)
    • Packet Voice DSP Module Conferencing
  • Lesson 7: Configuring DSPs
    • Configuring DSPs for Voice Termination (1)
    • Codec Complexity Configuration
    • Configuring DSP Resources for Transcoding, Conferencing, and MTP (1)
    • Transcoding and Conferencing Example
    • Verifying DSPs (1)
    • Summary
  • Module Summary

Module 2: Gateway Dial Plans

  • Module Introduction
    • Topic List
  • Lesson 1: VoIP Overview
    • VoIP and Traditional Telephony Comparison
      • VoIP Components
      • VoIP Media Transmission Overview
    • Real-Time Transport Protocol
      • Real-Time Transport Control Protocol
      • Secure RTP
    • VoIP Media Considerations
    • Voice Activity Detection Overview
  • Lesson 2: SIP Signaling Protocol
    • SIP Architecture Overview
      • SIP Signaling
      • SIP Architecture Components
      • SIP Servers
      • SIP Architecture Examples
      • SIP Direct Call Flows
  • Lesson 3: SIP Addressing
    • SIP Address Types
    • Address Registration
    • Address Resolution
  • Lesson 4: Codecs in SIP
    • Session Description Protocol
      • SDP Examples
      • Delayed Offer
      • Early Offer
      • Early Media (1)
  • Lesson 5: Configuring Basic SIP
    • Basic SIP Configuration Overview
      • User Agent Configuration
      • Dial Peer Configuration
      • Basic SIP Configuration Example
  • Lesson 6: Configuring SIP ISDN Support
    • SIP SRTP Support Overview
      • SIPS Global and Dial Peer Commands
      • SRTP Global and Dial Peer Commands
      • SIPS and SRTP Configuration Example
  • Lesson 7: Customizing SIP Gateways
    • SIP Gateways Tuning Overview
      • SIP Transport
      • SIP Source IP Address and UA Timers
      • SIP UA Timers
      • SIP Early Media
    • Gateway-to-Gateway Configuration Example
    • UA Example
  • Lesson 8: Verifying SIP Gateways
    • show sip-ua Command Overview
      • SIP-UA General Verification
      • SIP-UA Registration Status and Timers
      • SIP-UA Call Information
    • SIP Debugging Overview
    • Examining the INVITE Message
    • Examining the 200 OK Message
    • Examining the BYE Message
  • Lesson 9: Audio Clarity Requirements
    • Audio Clarity Factors
    • Delay Sources
    • Delay Types
    • Acceptable Delay (G.114)
    • Jitter
    • Packet Loss
    • Summary of QoS Objectives
  • Module Summary

Module 3: Cisco Unified Communication Manager (CUCM)

  • Module Introduction
    • Topic List
  • Lesson 1: Configuring CUCM for Gateways and Trunks
    • Check CUCM Version
    • Cisco UCM Audio Codec Preference List (1)
      • Audio Codec Preference List - Copy Existing
      • Audio Codec Preference List - New List
      • Audio Codec Preference List - Name and Order
  • Cisco UCM Region Configuration
  • Region Configuration - Region Relationships
  • Device Pool Configuration - Add New Device Pool (1)
  • Annunciator Configuration
  • Conference Bridge Configuration
  • Media Termination Point Configuration
  • Music on Hold Server Configuration
    • Music on Hold Service (IP Voice Media Streaming App) Parameter Settings (1)
    • Music on Hold Service (Duplex Streaming) Parameter Settings
    • Media Resource Group Configuration (1)
      • Media Resource Group List Configuration
  • Lesson 2: SIP Trunk Configuration
    • SIP Trunk Security Profile Configuration (1)
  • SIP Profile Configuration (1)
  • SIP Trunk to Cisco CUBE Configuration (1)
  • Reset SIP Trunks
  • Path Selection Configuration Elements in Cisco Unified Communications Manager
  • Create Route Pattern to get to the CUBE
  • Module Summary

Module 4: Configuring Cisco Unified Border Element (CUBE)

  • Module Introduction
    • Topic List
  • Lesson 1: What Does a Session Border Controller (SBC) Do?
    • What Is Driving SBC Adoption?
    • CUBE’s Primary Strategic Differentiators
    • Cisco Unified Border Element – Router Integration
    • CUBE Offers Architectural Choice and Flexibility
    • CUBE Is Scalable
    • CUBE Is Robust and Reliable
    • CUBE Session Capacity Summary
    • CUBE Interoperability
    • CUBE Is Easy to Monitor and Manage
    • SIP Trunking to Cisco WebEx
    • Using CUBE in Your Contact Center Environment
    • CUBE Licensing (1)
    • Cisco Session Management & CUBE
    • CUBE/vCUBE Deployment Scenarios
    • The Centralized Model
    • The Distributed Model
    • The Hybrid Model
  • Lesson 2: CUBE Call Flow
    • CUBE Call Processing
    • Cisco Unified Border Element Basic Call Flow
    • Transitioning to Centralized SIP Trunking...
    • Steps to transitioning...
      • Step 1: Configure CUCM to route calls to the edge SBC
      • Step 2: Get details from SIP Trunk provider
      • Step 3: Enable CUBE Application on Cisco routers
      • Step 4: Configure Call routing on CUBE
  • WAN Dial-Peer Configuration
  • LAN Dial-Peer Configuration
  • Lesson 3: CUBE Dial-Peers Call Routing
    • Understanding Dial-Peer Matching Techniques
    • Understanding Inbound Dial-Peer Matching Techniques (1)
    • Understanding Outbound Dial-Peer Matching Techniques (1)
  • Lesson 4: CUBE Advanced Call Routing
    • Additional Headers for Outbound Dial-Peer Matching
    • Introducing Outbound Dial-peer Provision Policy
    • Dial-peer Provision Policy Configuration (1)
    • Dial-peer Provision Policy Example – Match on FROM (1)
    • Destination Dial-peer Group
    • Destination Dial-peer Group Configuration
    • Destination Server Group
    • Multiple Destination-Patterns Under Same
    • Multiple Incoming Patterns Under Same
  • Lesson 5: Media Manipulation
    • Audio Transcoding and Transrating
    • Configuration for SCCP based Transcoding
    • Configuration for LTI based Transcoding
  • Lesson 6: External/PSTN Call Recording
    • External/PSTN Call Recording Options
    • CUBE Controlled Recording Option – Media Forking
    • Audio only Media Forking for an Audio/Video Call
    • CUBE Controlled Recording Option – SIPREC
  • Lesson 7: Call Admission Control
    • Call Admission Control Based on Total Calls, CPU and Memory usage (1)
    • Call Admission Control at the edge
    • Call Admission Control based on Call spikes (1)
    • Call Admission Control based on Bandwidth
  • Lesson 8: Multiple Non-Authenticated SIP Trunks on a CUBE
    • Non-Authenticated SIP Trunking to more than one Service Provider
  • Lesson 9: Multiple Authenticated/Registered SIP Trunks on a CUBE
    • Multiple Instances of SIP-UA on a CUBE
    • Introducing Tenants on CUBE
    • “Voice class Tenant” Overview
    • Authenticating Multiple trunks with same Realm
    • Configuring Voice Class Tenant
  • Module Summary

Module 5: Configuring High Availability

  • Module Introduction
    • Topic List
  • Lesson 1: High Availability
    • CUBE High Availability Options
      • CUBE HA Design Considerations on ISR-G2 for Box-to-Box Redundancy (1)
  • CUBE Configuration on ISR-G2 Box-to-Box Redundancy (1)
  • CUBE HA Design Considerations on ASR1K/ISR-4K/vCUBE for Box-to-Box Redundancy (1)
  • CUBE Configuration on ASR1K-ISR-4K/vCUBE Box-to-Box Redundancy (1)
  • Additional Supported Options for CUBE HA
  • ASR B2B Redundancy: PROTECTED MODE
  • CUBE SIP Trunk Monitoring with OOD Options Message (1)
  • OOD Options Ping Keepalive Enhancement (1)
  • SIP Trunk to TDM PSTN Failover
  • Lesson 2: MMoH
    • Multicast MoH to Unicast MoH Conversion- CUBE
  • Module Summary

Module 6: Security

  • Module Introduction
    • Topic List
  • Lesson 1: CUBE Security
    • Five Layers of Security in CUBE
    • Cube Security Best Practices Summary
    • Topology/Addressing Hiding
    • SIP Trunk to ITSP
    • IP Trust List for Signaling
    • Toll Fraud Mitigation
    • Configure Call Routing on CUBE
  • Understanding Dial-Peer Matching Techniques: LAN & WAN Dial-Peers
  • WAN Dial-Peer Configuration
  • LAN Dial-Peer Configuration
  • ACLS Applied on WAN Interfaces
    • SIP Listening Port Protection
    • Close Unused Session Transport Mechanisms
  • NBAR to Protect Against SIP Flooding and UDP Attacks at Opened RTP Ports
  • Firewall: General Guidelines
    • CUBE Firewall Deployment Scenarios
  • Lesson 2: SIP TLS Support with SRTP
    • Secure SIP
    • SRTP Passthrough Configuration (Unsupported Crypto Suites)
  • SIP TLS/SRTP Support for Microsoft Skype for Business (Lync) Interop
  • Module Summary

Module 7: Monitoring and Troubleshooting

  • Module Introduction
    • Topic List
  • Lesson 1: Monitoring and Troubleshooting Cisco Cube
    • Dialed Number Analyzer (DNA) for CUBE
  • Input Option - Calling/Called Number (1)
  • Input Option- SIP Message (1)
  • Lesson 2: SIP Profile Test Tool
    • SIP Profile Test Tool (1)
    • CUBE Monitoring
    • Prime Collaboration (1)
      • Prime Collaboration- Assurance (1)
      • Prime Collaboration- Analytics (1)
  • Lesson 3: Troubleshooting
    • Troubleshooting of Calls
      • CUBE Debugging
      • SIP Debug (1)
      • CUBE Per-Call Debugging (PCD) (1)
  • IOS Embedded Packet Capture on ISR-G2 (1)
    • Pcap
    • Export pcap
    • Call Setup Failure
      • IOS Command Output after Outbound Call
      • IOS Command Output after Inbound Call Attempt
    • Debug ccsip message
      • debug voip ccapi inout
      • debug ccsip transport debug ip tcp transaction debug crypto pki
      • Troubleshooting (1)
      • Verifying Certificates
  • Lesson 4: Serviceability
    • New CUBE Serviceability Features
    • Call History Stats- Graphical or Tabular Form
  • Total Number of Active Concurrent Calls
  • Debugging Made Easier (1)
  • Module Summary

Prices & Delivery methods

Online Training

Duration
3 days

Price
  • CAD 5,375
Classroom Training

Duration
3 days

Price
  • Canada: CAD 5,375

Schedule

Currently there are no training dates scheduled for this course.